Upgrade the factory control arms on your 2007-2018 Jeep Wrangler JK with BDS heavy-duty replacements. Designed as a bolt-in upgrade, BDS rear lower control arms add strength and adjustability to your stock or lifted vehicle. Built from thick wall tubing and specially formed to maximize tire clearance.At the axle end they utilize an OE-style poly bushing for long service-free operation and better isolation of noise, vibration, and harshness (NVH). At the frame mount they feature a large, forged flex end for strength, durability, and off-road articulation. The forged flex ends allow length adjustments to correctly position the rear axle and correct caster. Capable of 15-degrees of misalignment in either direction for more flex out on the trail.
- Heavy-duty construction, formed to improve ground clearanceFully welded ends with polyurethane bushing and large, forged flex endDesigned for 0- to 5-inch lifts to correct front axle positioning and caster
Application Summary:
| Year |
Make/Model |
| 2007-2017 |
Jeep Wrangler |
| 2018 |
Jeep Wrangler JK |
| Attributes |
| Bushing Material |
Rubber |
| Bushings Included |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Construction |
Tubular |
| Control Arm Material |
Steel |
| Country of Origin (Primary) |
US |
| Grease Fitting Included |
Yes |
| Hazardous Material Code |
N |
| Installation Time |
1-2 Hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Height |
0_6_5 |
| NAFTA Preference Criterion Code |
B |
| Pvg Product Status |
Active |
| SDR Required Flag |
N |
| GTIN |
00711745607521 |
